Stage timer software

A stage timer the speaker can’t miss.

PresenterCue counts down each session in large digits on any screen, changes colour as time runs short, counts up in overtime and starts the next segment’s clock from the run of show.

  1. Set durations in the run of show
  2. Put the timer on a stage screen
  3. Start, pause or add time live
See the timer features

Countdown, overtime and what’s next, on one screen.

A stage timer is only useful if it shows the right time for the right segment. PresenterCue’s timer is driven by the run of show, so when one session ends the next countdown is ready, and every screen shows the same clock.

How to time a panel discussion →
PresenterCue stage timer on a phone, counting down with five minutes left

Green, yellow, red: where the colours come from.

Speaker timing lights are older than any app. At Toastmasters speech contests, a timer shows a green signal, then yellow, then red: for a five-to-seven-minute speech, green at 5 minutes, yellow at 6 and red at 7. Many speakers who have trained in public speaking already know them.

Event stage timers flip the logic to count down to the end of the slot: amber when 5 minutes remain, red at 1 minute. PresenterCue uses that as its default and lets you change the thresholds per segment. It also shows the words with the colour, so the timer still works for colour-blind speakers.

Fact card: Toastmasters shows green at 5, yellow at 6 and red at 7 minutes

Every timer a stage needs

Countdowns for speakers, controls for the crew and displays for any screen.

Why talk lengths are short, and strict.

TED limits every talk to 18 minutes, with no exceptions. Its curator Chris Anderson describes the length as long enough to be serious and short enough to hold attention.

Most events don’t need TED’s rule, but they do need a rule that’s kept. A stage timer turns the agreed slot into something the speaker can see, and the overtime count-up turns overruns into a number the producer can act on.

Phone listing common talk lengths, from a TED talk to a Table Topics answer

Where to put the timer.

The standard spot is a wedge-shaped confidence monitor on the stage floor, downstage centre, angled up at the speaker and out of the audience’s sightline. For speakers who walk the stage, add a second screen at the back of the room so the time is visible wherever they face.

In smaller rooms a tablet on the lectern works. Keep the timer out of camera shots, check its brightness with the stage lights on, and put a time-of-day clock beside the countdown whenever there’s a live stream with a fixed start.

Phone listing places to put a stage timer, from the floor wedge to the control booth

FAQs

What to know before you put a timer on stage.

What is stage timer software?

Stage timer software shows a countdown to speakers and hosts on a screen they can see, while someone else controls it. PresenterCue’s timer runs in a browser and takes its timings from the run of show.

Do I need special hardware?

No. Any screen driven by a computer with a modern browser works: a confidence monitor, a TV at the stage edge, a laptop on the lectern or a tablet.

Can I control the timer from my phone?

Yes. The controls and the display are separate views, so you can run the timer from a phone or laptop anywhere while it shows on the stage screen.

Can several screens show the same timer?

Yes. Open the timer view on as many screens as you need, such as a confidence monitor, a side-stage screen and the control room, and they all show the same time.

What happens when a speaker goes over?

The timer turns red and counts up, so everyone sees how far over the session is. You can also send a private wrap-up cue with the speaker cue system.

Does it work without a run of show?

Yes. You can start a standalone timer with any duration. Connecting it to a run of show means the next segment’s timer is always ready.

What colours should a stage timer use?

Green while there’s plenty of time, amber or yellow as the end approaches and red when time is up. The scheme is familiar from speaker timing lights such as those used at Toastmasters.

When should the timer turn red?

For most event talks, when 1 minute remains or when time is up. Agree it with the speaker in the briefing so the colour means the same thing to both of you.

Should the timer count up or down?

Down during the slot, so the speaker sees time remaining. Once time runs out, count up in red, so everyone sees how far over the session is.

How long should a conference talk be?

It depends on the format, but shorter usually works better. TED caps talks at 18 minutes. Panels often run about 45 minutes including Q&A.

Sources for this page

1. Toastmasters District 106: speech contest script with timing signals
2. Toastmasters Magazine: Manage your speaking time
3. Inc.: TED Talks’ 18-minute rule
4. Eventzilla: Do’s and don’ts for a conference panel discussion

Put the clock where the speaker can see it.

Open a timer on any screen and start counting down.

Countdown

Countdown

PresenterCue feature

Countdown

Each segment’s duration comes from the run of show. Start the countdown when the speaker starts, and the timer shows exactly what’s left.

Built for
Speakers and hosts
Source
The run of show
Format
Minutes and seconds

What you get

  • Duration from the run of show
  • Large, high-contrast digits
  • Next segment ready to go
  • Manual timers for anything else
Countdown

Overtime

PresenterCue feature

Overtime

When time is up, the timer turns red and counts up, so the speaker and the producer both know exactly how far over the session is.

Built for
Producers
Shows
Time over, in red
Feeds
Ahead or behind tracking

What you get

  • Overtime count-up
  • Overrun logged per segment
  • Show-wide ahead or behind
  • Optional flashing at zero
Control

Remote control

PresenterCue feature

Remote control

Start, pause and reset the timer from a laptop in the control room or a phone side of stage, while the display sits on a stage screen.

Built for
Stage managers
Controls
Start, pause, reset
From
Any device

What you get

  • Control and display on separate devices
  • Several people can control
  • Pause for applause or technical issues
  • Jump to any segment
Control

Add or remove time

PresenterCue feature

Add or remove time

Give a speaker two more minutes, or take time back when the show is running late, without restarting the countdown.

Built for
Producers
Adjusts
In steps you choose
Updates
The run of show too

What you get

  • Plus and minus buttons
  • Custom step size
  • Later segments update
  • Speaker sees the change
Display

Colour warnings

PresenterCue feature

Colour warnings

The timer changes colour at the thresholds you set, so the speaker can read the situation from across the stage without reading the digits.

Built for
Speakers
Default
Amber at 5, red at 1
Adjustable
Per segment

What you get

  • Custom thresholds
  • Colour-blind-friendly labels
  • Message line under the timer
  • Works with speaker cues
Display

Time of day

PresenterCue feature

Time of day

Show the time of day alongside the countdown, for hosts who need to hit a fixed time such as a live broadcast or a hard venue curfew.

Built for
Hosts and broadcast
Shows
Time of day and countdown
Time zone
The venue’s

What you get

  • Time of day display
  • Countdown to a fixed time
  • Venue time zone
  • Full-screen on any display

Share this page

Send this page to someone who runs live events.