---
title: Stage Timer Software for Speakers and Events | PresenterCue
description: A stage timer for speakers that counts down each segment, turns amber and red as time runs out and follows the run of show. Stage timer software in a browser.
url: https://presentercue.com/stage-timer/
updated: 2026-11-16
---

# A stage timer the speaker can’t miss.

PresenterCue counts down each session in large digits on any screen, changes colour as time runs short, counts up in overtime and starts the next segment’s clock from the run of show.

1. Set durations in the run of show
2. Put the timer on a stage screen
3. Start, pause or add time live

## Countdown, overtime and what’s next, on one screen.

A stage timer is only useful if it shows the right time for the right segment. PresenterCue’s timer is driven by the run of show, so when one session ends the next countdown is ready, and every screen shows the same clock.

See also: [How to time a panel discussion](https://presentercue.com/guides/how-to-time-a-panel-discussion/)

## Green, yellow, red: where the colours come from.

Speaker timing lights are older than any app. At Toastmasters speech contests, a timer shows a green signal, then yellow, then red: for a five-to-seven-minute speech, green at 5 minutes, yellow at 6 and red at 7. Many speakers who have trained in public speaking already know them.

Event stage timers flip the logic to count down to the end of the slot: amber when 5 minutes remain, red at 1 minute. PresenterCue uses that as its default and lets you change the thresholds per segment. It also shows the words with the colour, so the timer still works for colour-blind speakers.

> 5·6·7: minutes: green, yellow, red for a 5–7 minute speech (Toastmasters speech contest scripts)

## Why talk lengths are short, and strict.

TED limits every talk to 18 minutes, with no exceptions. Its curator Chris Anderson describes the length as long enough to be serious and short enough to hold attention.

Most events don’t need TED’s rule, but they do need a rule that’s kept. A stage timer turns the agreed slot into something the speaker can see, and the overtime count-up turns overruns into a number the producer can act on.

## Where to put the timer.

The standard spot is a wedge-shaped confidence monitor on the stage floor, downstage centre, angled up at the speaker and out of the audience’s sightline. For speakers who walk the stage, add a second screen at the back of the room so the time is visible wherever they face.

In smaller rooms a tablet on the lectern works. Keep the timer out of camera shots, check its brightness with the stage lights on, and put a time-of-day clock beside the countdown whenever there’s a live stream with a fixed start.

## Every timer a stage needs

Countdowns for speakers, controls for the crew and displays for any screen.

### Countdown

Time left in the segment. Each segment’s duration comes from the run of show. Start the countdown when the speaker starts, and the timer shows exactly what’s left.

- Built for: Speakers and hosts
- Source: The run of show
- Format: Minutes and seconds
- Duration from the run of show
- Large, high-contrast digits
- Next segment ready to go
- Manual timers for anything else

### Overtime

Counts up when time runs out. When time is up, the timer turns red and counts up, so the speaker and the producer both know exactly how far over the session is.

- Built for: Producers
- Shows: Time over, in red
- Feeds: Ahead or behind tracking
- Overtime count-up
- Overrun logged per segment
- Show-wide ahead or behind
- Optional flashing at zero
- Related: [Run of show software](https://presentercue.com/run-of-show-software/)

### Remote control

Run the clock from anywhere. Start, pause and reset the timer from a laptop in the control room or a phone side of stage, while the display sits on a stage screen.

- Built for: Stage managers
- Controls: Start, pause, reset
- From: Any device
- Control and display on separate devices
- Several people can control
- Pause for applause or technical issues
- Jump to any segment

### Add or remove time

Adjust without restarting. Give a speaker two more minutes, or take time back when the show is running late, without restarting the countdown.

- Built for: Producers
- Adjusts: In steps you choose
- Updates: The run of show too
- Plus and minus buttons
- Custom step size
- Later segments update
- Speaker sees the change

### Colour warnings

Green, amber, red. The timer changes colour at the thresholds you set, so the speaker can read the situation from across the stage without reading the digits.

- Built for: Speakers
- Default: Amber at 5, red at 1
- Adjustable: Per segment
- Custom thresholds
- Colour-blind-friendly labels
- Message line under the timer
- Works with speaker cues
- Related: [Speaker cue system](https://presentercue.com/speaker-cue-system/)

### Time of day

The real clock, too. Show the time of day alongside the countdown, for hosts who need to hit a fixed time such as a live broadcast or a hard venue curfew.

- Built for: Hosts and broadcast
- Shows: Time of day and countdown
- Time zone: The venue’s
- Time of day display
- Countdown to a fixed time
- Venue time zone
- Full-screen on any display

## FAQs

### What is stage timer software?

Stage timer software shows a countdown to speakers and hosts on a screen they can see, while someone else controls it. PresenterCue’s timer runs in a browser and takes its timings from the run of show.

### Do I need special hardware?

No. Any screen driven by a computer with a modern browser works: a confidence monitor, a TV at the stage edge, a laptop on the lectern or a tablet.

### Can I control the timer from my phone?

Yes. The controls and the display are separate views, so you can run the timer from a phone or laptop anywhere while it shows on the stage screen.

### Can several screens show the same timer?

Yes. Open the timer view on as many screens as you need, such as a confidence monitor, a side-stage screen and the control room, and they all show the same time.

### What happens when a speaker goes over?

The timer turns red and counts up, so everyone sees how far over the session is. You can also send a private wrap-up cue with the [speaker cue system](https://presentercue.com/speaker-cue-system/).

### Does it work without a run of show?

Yes. You can start a standalone timer with any duration. Connecting it to a [run of show](https://presentercue.com/run-of-show-software/) means the next segment’s timer is always ready.

### What colours should a stage timer use?

Green while there’s plenty of time, amber or yellow as the end approaches and red when time is up. The scheme is familiar from speaker timing lights such as those used at Toastmasters.

### When should the timer turn red?

For most event talks, when 1 minute remains or when time is up. Agree it with the speaker in the briefing so the colour means the same thing to both of you.

### Should the timer count up or down?

Down during the slot, so the speaker sees time remaining. Once time runs out, count up in red, so everyone sees how far over the session is.

### How long should a conference talk be?

It depends on the format, but shorter usually works better. TED caps talks at 18 minutes. Panels often run about 45 minutes including Q&A.

## Sources

1. [Toastmasters District 106: speech contest script with timing signals](https://d106tm.org/wp-content/uploads/2024/09/2024-Fall-Online-Contest-Script-9-Sep.pdf)
2. [Toastmasters Magazine: Manage your speaking time](https://www.toastmasters.org/magazine/magazine-issues/2025/feb/manage-your-speaking-time)
3. [Inc.: TED Talks’ 18-minute rule](https://www.inc.com/carmine-gallo/why-your-next-sales-pitch-should-be-no-longer-than-a-ted-talk.html)
4. [Eventzilla: Do’s and don’ts for a conference panel discussion](https://www.eventzilla.net/?p=1239)

## Put the clock where the speaker can see it.

Open a timer on any screen and start counting down.

Open PresenterCue: https://presentercue.com/app/
