---
title: Show Calling Software for Live Events | PresenterCue
description: Call every cue from one screen. PresenterCue show calling software gives the show caller a live script with standbys, go cues and timings from the run of show.
url: https://presentercue.com/show-calling-software/
updated: 2026-11-16
---

# Call every cue from one screen.

Your show caller gets a live calling script built from the run of show: every cue with its department, its standby and its go, in order, with the clock beside it.

1. Write cues into the run of show
2. Stand by each department
3. Call go, and the next cue loads

## The calling script and the clock, side by side.

Show callers juggle a paper script, a stopwatch and a headset. PresenterCue puts the cue list, the countdown to the next segment and the producer’s notes on one screen, and marks each cue as called so nobody loses their place.

See also: [What does a show caller do?](https://presentercue.com/guides/what-is-a-show-caller/)

## Warning, standby, go: the language software has to respect.

Calling a show has a grammar that predates software. Theatre stage managers give three kinds of call: a warning, a standby and a go. A light cue might be called “Warning LX 24”, then “Standby LX 24”, then “LX 24, go”. The department and number come first and the word “go” comes last, because “go” is the word operators act on.

Operators answer standbys so the caller knows they’re ready: “Standing by”, or just “Lights”. PresenterCue’s calling script follows that grammar instead of inventing its own, so a caller trained in theatre or corporate events can read it without a manual.

## How long before a cue should the standby come?

Long enough for the operator to get ready, short enough that they’re still focused when the go arrives. Stage management teaching material from Oberlin College puts it at a few lines or about ten seconds before the cue.

Consistency matters more than the exact number. If standbys arrive at random intervals, operators either relax too early or panic too late. For cues tied to the clock, PresenterCue shows a countdown beside each one, so the caller can stand by at the same interval every time.

> ~10s: between a standby and its go is a common guide (Oberlin College stage management handbook)

## Software for the caller, not instead of the caller.

There’s a difference between show calling and show control. Show control software and consoles execute cues: they play the sound, run the video, fade the lights. Show calling is a person deciding the moment, because the moment depends on a speaker’s pause, a laugh or a late walk-up.

PresenterCue stays on the calling side of that line. It doesn’t send triggers to your consoles. It gives the caller the script, the timing and the producer’s changes, and leaves the go to the person on headset.

## Built for the calling position

The tools a show caller reaches for, in the order they need them.

### Calling script

Every cue, in show order. The calling script is generated from the run of show, so the cues the producer planned are the cues the caller sees, in the right order.

- Built for: Show callers
- Source: The run of show
- Replaces: Paper scripts
- Cues in running order
- Segment headers and timings
- Notes beside each cue
- Big, readable text in a dark booth

### Department colours

Lights, sound, video, stage. Each department has its own colour and prefix, so the caller can read a block of cues at a glance and call them together.

- Built for: Show callers
- Departments: LX, SND, VID, STG and custom
- Shows: Prefix and colour
- Custom departments
- Cue numbers per department
- Grouped cues called together
- Filter to one department

### Standby and go

Warn first, then execute. Put departments on standby ahead of the cue, then call the go. The screen shows which cues are standing by and which come next.

- Built for: Show callers
- States: Standby, go, done
- Language: Your house style
- Standby list always visible
- Next cue highlighted
- Countdown to timed cues
- Visual cue reminders
- Related: [What is show calling?](https://presentercue.com/guides/what-is-show-calling/)

### Called-cue tracking

Never lose your place. Each cue is marked as called, with the time it went. If the show jumps, the caller can skip ahead and the script follows.

- Built for: Show callers
- Records: Time each cue was called
- Helps: Debriefs and reruns
- Mark cues as called
- Skip or repeat a cue
- Timestamped log
- Pick up where a backup left off

### Producer notes

Changes reach the caller first. When the producer cuts a segment or moves a cue, the change appears in the caller’s script with a note, before it’s needed.

- Built for: Producers and callers
- Delivers: Live changes and notes
- Replaces: Shouting over comms
- Change notes on cues
- Cut and moved segments flagged
- Notes from any role
- History of what changed
- Related: [Event control room](https://presentercue.com/event-control-room/)

### Crew view

Operators follow along. Operators can open their own department’s cue list and follow the caller, so they’re ready before the standby comes.

- Built for: Lighting, audio and video operators
- Shows: Their department’s cues
- Needs: A browser
- Department-only view
- Live position in the show
- Notes for each operator
- Works on a tablet at the desk

## FAQs

### What is show calling software?

Show calling software gives the show caller a live, ordered list of every cue in a show, tied to the timing, so they can stand by and call each department at the right moment. Read [what is show calling](https://presentercue.com/guides/what-is-show-calling/) for the basics.

### Does PresenterCue trigger lighting, sound or video?

No. PresenterCue doesn’t send control signals to consoles or playback systems. The caller still calls the cue on comms and each operator executes it. PresenterCue keeps everyone working from the same script and timing.

### Does it work with our headset system?

Yes. PresenterCue runs on a screen at the calling position, beside whatever comms you use. It doesn’t need to connect to your headset system.

### How should cues be numbered?

Most teams number cues per department, such as LX 14 or SND 8, and keep the numbers in the run of show so the caller and operators use the same names.

### What happens when the show changes live?

The producer edits the run of show and the change appears in the calling script, flagged, so the caller knows what moved before they reach it.

### Can a backup caller follow along?

Yes. A second person can open the same calling script and see which cues have been called, so they can take over at any point.

### What’s the difference between show calling and show control?

Show calling is a person telling each department when to act. Show control is software or hardware that executes cues automatically. Many productions use both: a caller decides the moment, and a control system plays the cue.

### Should I say “lights” or “LX”?

Both are common. “LX” is widely used in UK theatre and many corporate crews; others say “lights”. Pick one, write it in the run of show and use it on every call.

### What is a warning call?

An optional early heads-up before the standby, such as “Warning LX 24”. It’s common in theatre for complex cues; many corporate callers skip it and go straight to the standby.

### How do you call several cues at once?

Stand them all by, then give one go that names them, such as “Lights and sound 45, go”. For a fast sequence, call each go in turn after a single group standby.

## Sources

1. [Wikipedia: Cue (theatrical)](https://en.wikipedia.org/wiki/Cue_(theatrical))
2. [Oberlin College stage management project: How to run tech](https://sites.google.com/oberlin.edu/oberlin-sm-project/procedures/how-to-run-tech)
3. [LibreTexts, Technical Theatre Practicum: Cueing scripts](https://human.libretexts.org/Bookshelves/Theater_Film_and_Storytelling/Technical_Theatre_Practicum_(Boltz)/01%3A_Chapters/1.12%3A_Cueing_Scripts)
4. [Theatrecrafts: Calls, cans and comms](https://theatrecrafts.com/pages/home/topics/stage-management/calls-and-cans/)

## Give your caller a better script.

Build the cues once, in the run of show, and call them live.

Open PresenterCue: https://presentercue.com/app/
